EngineAirplaneBoatCarHelicopterElectronics

Can you imagine the excitement of piloting your own model airplane, flying gracefully through the sky and responding to your commands? Thunder Tiger airplanes will offer you just that kind of thrill.

 

Radio-Controlled Model Airplane is the illustrious blending of science and art that requires the precise skill of building and the artful skill of remotely controlling a flying apparatus. Today's replica R/C planes are so sophisticated and detailed that you can actually build an airplane that might surprise Wright Brothers had they been alive. Most planes are propeller powered by engine or quiet electric motor, and are constructed by Balsa, liteply, Styrofoam or composite materials. Basically the lighter the plane the better.

 
Measurement
　Wing span:from one wing tip to the other
　Length: from front end to rear end of plane
　Totalweight: all up equipped weight
　Wing chord: from leading to trailing edge of main wing
　Wing area: wing spanxaverage wing chord
　Wingloading: total weight/wing area




We would recommend you to go to the flying field and observe the skilled pilots fly their planes. It's a good way to see the maneuvers visually and know how are these maneuvers done. If you do not know any flying site, you can check AMA for your local flying field or ask the local hobby shop for its location. You can ask any question to these experienced pilots or your local hobby shop, and we're sure they will be more than happy to help you out with any question you might have. Here is what you need to fly a R/C airplane.
1) Airplane
2) Radio Gear
3) Power Unit
 

4) Field Equipment
Radio-Controlled Model Airplane is the illustrious blending of science and art that requires the precise skill of building and the artful skill of remotely controlling a flying apparatus. Today's replica R/C planes are so sophisticated and detailed that you can actually build an airplane that might surprise Wright Brothers had they been alive. Most planes are propeller powered by engine or quiet electric motor, and are constructed by Balsa, liteply, Styrofoam or composite materials. Basically the lighter the plane the better.
 
　The Super Combo is the ultimate in Truly-Ready-To-Fly R/C airplanes! The airplane is com-pletely built and covered; the engine is installed with the prop, spinner and glow plug in place; the tank is plumbed and installed in the fuselage with the fuel line hooked up and ready for fuel; the radio is completely installed with servos mounted and control linkages to the surfaces in place; the switch harness is in the fuselage ready to turn on; even the wheels are attached The engine and radio that are furnished with each particular airplane are iden-tified on the appropriate page.







 
Each ARF airplane is built and covered by factory craftsmen. Com-plete hardware is included: linkage, engine mount, wheels, landing gear, etc.

 
Expertly designed and engineered for building and flying ease. All of the parts created from the finest material and are cleanly die cut or machined for "fall-together?assembly. Com-plete hardware is included. Glue, tools, and finishing material are required for completion.






Radio-Controlled Model Airplane is the illustrious blending of science and art that requires the precise skill of building and the artful skill of remotely controlling a flying apparatus. Today's replica R/C planes are so sophisticated and detailed that you can actually build an airplane that might surprise Wright Brothers had they been alive. Most planes are propeller powered by engine or quiet electric motor, and are constructed by Balsa, liteply, Styrofoam or composite materials. Basically the lighter the plane the better.