Product
OBL 29/35-10H
 |
Description | OBL 29/35-10H |
| Item No | 2381 | |
| Category | Electronics >>> BLDC >>> OBL Series | |
| Update Data | 2008-08-11 | |
Basic Specification
|
Product Name |
OBL 29/35-10H |
|
Product No. |
2381 |
|
Voltage Range |
2~3S Li-Po Battery |
|
KV Rating (PRM/Volt) |
3500 RPM/V |
|
Max. Efficient Current |
4~20A |
|
Max. Surge Current |
30A / 60s |
|
Internal Resistance |
36 mΩ |
|
Dimension ψx L |
28.5 x 28.1 mm (1.12 x 1.11 in) |
|
Shaft Diameter |
3.175mm (0.125 in) |
|
Weight (g/oz.) |
55 / 1.94 |
Introduction
The Ripper OBL outrunner motors are designed for R/C electric helicopters. Thunder Tiger provides a brand new range of brushless motors to satisfy all your flying needs. Extremely high torque and masses of power for a motor of its size. With the best cooling design, you can get the best efficiency out of the motor.
Features
1) The perfect current capacity for long time flying
2) Provides extremely high torque for flying
3) The most efficiently RPM value
4) The maximum efficiency current
5) The best mechanical design for cooling motor
6) Light weight with the best performance
7) Dual Ball Bearing shaft support
8) Special designed for small size electric helicopter of 3S Li-Po Battery setup.
2) Provides extremely high torque for flying
3) The most efficiently RPM value
4) The maximum efficiency current
5) The best mechanical design for cooling motor
6) Light weight with the best performance
7) Dual Ball Bearing shaft support
8) Special designed for small size electric helicopter of 3S Li-Po Battery setup.
Content
1) Ripper outrunner brushless motor x 1
2) Heat shrink x 3
3) Golden Connector (male) x 3
4) Golden Connector (female) x 3
5) Screw Set x 1
6) L Type hex wrench ( 2.5 mm) x 1
7) Instruction Manual x 1
2) Heat shrink x 3
3) Golden Connector (male) x 3
4) Golden Connector (female) x 3
5) Screw Set x 1
6) L Type hex wrench ( 2.5 mm) x 1
7) Instruction Manual x 1