Product
PRO-50(R)/9605
Question:
Hi my name is Joachim Néron, i belive in Drummondville, Québec, Canada. I have a great question for you. I' m a biginner in rc heli and I've bought a Raptor 50 V2 with PRO-50(R)/9605 and i have a big dificulty to set my motor. i use 15% PMF15 Helico gaz composition is syntheticc oil and caster oil + TKO add from Power Master In all forum i visited, i saw too many different setting and too many reason to do those. Could You Please, refer to me a good setting for a beginner Best regards from Joachim Néron
Answer:
Dear Sir, Thank you for your e-mail. We appreciate your support to Thunder Tiger. We do not use the RMF15% fuel to fly a helicopter. However, Please check below first. 1) Make sure the carburator is open a little (about 5%~10%) from transmitter setting (throttle trim). 2) Make sure the main needle is loose about 2.5~3.5 cycle from tight. (you must loose the main needle first, and tight it more and more according to your flight.) If the power is not enough but the setting of the throttle curve and pitch curve is ok, please tight the main needle 2 click/times to reach your needs. 3) The mixture screw is well adjusted after the factory. But you can also adjust it when you have experienced it more. The mixture screw will affect the idle rpm and response of the throttle from idle to middle rpm (hover position). As a beginner in RC helciopter, an instructor is necessary for assisting you to fly the helicopter yourselves in the condition of the engine is well adjusted. In addition, Thunder Tiger has authorized worldwide distributors that provide our customers with selling, marketing, after service, and so on. Please feel free to contact Hobbycraft Canada as below information for service and technical support. Hobbycraft Canada Tel: 905-738-6556 Fax: 905-738-6329 E-mail: info@hobbycraft.com Web: www.hobbycraft.com Best regards, Customer Service Thunder Tiger Corp. Thank you for choosing THUNDER TIGER. [ Simon ]
Hi my name is Joachim Néron, i belive in Drummondville, Québec, Canada. I have a great question for you. I' m a biginner in rc heli and I've bought a Raptor 50 V2 with PRO-50(R)/9605 and i have a big dificulty to set my motor. i use 15% PMF15 Helico gaz composition is syntheticc oil and caster oil + TKO add from Power Master In all forum i visited, i saw too many different setting and too many reason to do those. Could You Please, refer to me a good setting for a beginner Best regards from Joachim Néron
Answer:
Dear Sir, Thank you for your e-mail. We appreciate your support to Thunder Tiger. We do not use the RMF15% fuel to fly a helicopter. However, Please check below first. 1) Make sure the carburator is open a little (about 5%~10%) from transmitter setting (throttle trim). 2) Make sure the main needle is loose about 2.5~3.5 cycle from tight. (you must loose the main needle first, and tight it more and more according to your flight.) If the power is not enough but the setting of the throttle curve and pitch curve is ok, please tight the main needle 2 click/times to reach your needs. 3) The mixture screw is well adjusted after the factory. But you can also adjust it when you have experienced it more. The mixture screw will affect the idle rpm and response of the throttle from idle to middle rpm (hover position). As a beginner in RC helciopter, an instructor is necessary for assisting you to fly the helicopter yourselves in the condition of the engine is well adjusted. In addition, Thunder Tiger has authorized worldwide distributors that provide our customers with selling, marketing, after service, and so on. Please feel free to contact Hobbycraft Canada as below information for service and technical support. Hobbycraft Canada Tel: 905-738-6556 Fax: 905-738-6329 E-mail: info@hobbycraft.com Web: www.hobbycraft.com Best regards, Customer Service Thunder Tiger Corp. Thank you for choosing THUNDER TIGER. [ Simon ]
Correlative Q&A