Product
motor problems
Question:
Hi I'm having problems with my thunder tiger MTA-4 pro 21 it starts real easy idles no probs but as soon as i try to accelerate it cuts out i put my spare 21 pro motor in it and it does the same thing, so i thought it isn't the motors. I fitted new fuel lines still the same thing happens so i have ordered a new tank from you, I still cant see that being the problem as i just had it out and if i leave the glow igniter on the motor it runs ok I'm using new 20% nitro fuel and new OS number 4 and 8 glow plugs (tried both) I'm at a total loss I've adjusted the carby so many times it is rediculous always returning to factory settings before starting again. Oh I've also dismantled cleaned and re sealed the carby and rear seal with high temp fuel resistant sealant just incase there was an air leak. SIGNED TOTALY FRUSTRATED HEATH
Answer:
Dear Heath, Thank you for your e-mail. We appreciate your support to Thunder Tiger. Generally speaking, the engine runs ok without stall if you leave the glow starter on the engine untill pulled out, the problem could be the glow plug. However, the problem does not exist because you have tried two glow plugs. Then the problem might be in the carburetor such as the setting of the secondary needle or the loose of O ring...etc. Please feel free to contact "ACEHOBBY DIST. AUSTRALIA P.L." as followed for service and support. ACEHOBBY DIST. AUSTRALIA P.L. Tel: 61-2-9602-6153 Fax: 61-2-9602-6298 E-mail: steven@acehobbyaustralia.com.au Web: www.acehobbyaustralia.com Contact person: Mr. Steven Burgess Best regards, Customer Service Thunder Tiger Corp. [ Simon ]
Hi I'm having problems with my thunder tiger MTA-4 pro 21 it starts real easy idles no probs but as soon as i try to accelerate it cuts out i put my spare 21 pro motor in it and it does the same thing, so i thought it isn't the motors. I fitted new fuel lines still the same thing happens so i have ordered a new tank from you, I still cant see that being the problem as i just had it out and if i leave the glow igniter on the motor it runs ok I'm using new 20% nitro fuel and new OS number 4 and 8 glow plugs (tried both) I'm at a total loss I've adjusted the carby so many times it is rediculous always returning to factory settings before starting again. Oh I've also dismantled cleaned and re sealed the carby and rear seal with high temp fuel resistant sealant just incase there was an air leak. SIGNED TOTALY FRUSTRATED HEATH
Answer:
Dear Heath, Thank you for your e-mail. We appreciate your support to Thunder Tiger. Generally speaking, the engine runs ok without stall if you leave the glow starter on the engine untill pulled out, the problem could be the glow plug. However, the problem does not exist because you have tried two glow plugs. Then the problem might be in the carburetor such as the setting of the secondary needle or the loose of O ring...etc. Please feel free to contact "ACEHOBBY DIST. AUSTRALIA P.L." as followed for service and support. ACEHOBBY DIST. AUSTRALIA P.L. Tel: 61-2-9602-6153 Fax: 61-2-9602-6298 E-mail: steven@acehobbyaustralia.com.au Web: www.acehobbyaustralia.com Contact person: Mr. Steven Burgess Best regards, Customer Service Thunder Tiger Corp. [ Simon ]
Correlative Q&A